On 9/11/12 12:33 AM, Ahed Aladwan wrote:
> Hello TechTalk,
>
> We are standardizing EPICS (3.14.12.1) interface to GigE Vision & GeniCam standards compliant devices, mainly detectors, cameras, and other devices too as part of the areaDetector (1.8) module.
> The goal is to find a suitable SDK that support Linux (CentOS 6.3) & Windows 32/64 bit versions, thus, minimize the effort integrating new devices and improve cross compatibility.
Hi, Ahed.
Why not let areaDetector be your "SDK"? In other words, why not
standardize on the API areaDetector presents? Then you can use
any camera that areaDetector supports. You don't do anything
with SDKs or libraries areaDetector may use under the hood to
interface with the cameras; all you use is the areaDetector API.
Or am I not understanding what you're trying to do?
Lewis
- Replies:
- RE: GigE Vision & GeniCam standard SDK (areaDetector) Ahed Aladwan
- References:
- GigE Vision & GeniCam standard SDK (areaDetector) Ahed Aladwan
- Navigate by Date:
- Prev:
RE: ISEG EHS device support on the Raspberry Pi Computer peter.owens
- Next:
Re: ISEG EHS device support on the Raspberry Pi Computer Florian Feldbauer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: GigE Vision & GeniCam standard SDK (areaDetector) tom.cobb
- Next:
RE: GigE Vision & GeniCam standard SDK (areaDetector) Ahed Aladwan
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|