Experimental Physics and
Industrial Control System

<[email protected]> · Tue, 11 Sep 2012 09:01:55 +0000

> The goal is to find a suitable SDK that support Linux (CentOS 6.3) &
> Windows 32/64 bit versions, thus, minimize the effort integrating new
> devices and improve cross compatibility.

When I was looking at this a couple of years ago, we found that there were no cross platform freely available SDKs that would work with all manufacturers' cameras. There are paid-for options, I have used stemmer imaging's common vision blox for test purposes, but we went for Aravis because it is open source.

> 3-      AVT PvAPI SDK, from Allied Vision Technologies,
> http://www.alliedvisiontec.com/emea/products/software/avt-pvapi-
> sdk.html <http://www.alliedvisiontec.com/emea/products/software/avt-
> pvapi-sdk.html>

I believe this is tied to AVT/Prosilica cameras only. On the plus side, Mark Rivers areaDetector driver worked well on RHEL5 Linux for us, but we found it restricting to be tied to one vendor

> Aravis library (only on Linux)

This is what we are currently using, but be aware that the developer of Aravis has reverse engineered it, as the GigE Vision protocol is not freely available. This means that you may have issues using cameras that the developer has not tested it with (we had some unresolved connection issues using a Sony CVC EH6300 camera). We are using it on RHEL5 Linux and it works reliably on the AVT Manta, Prosilica GC, Baumer TXG and JAI Pulnix 6740 series we have tested it with.

Thanks,
Tom

-- 
This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. 
Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System