On 6/29/2012 1:15 AM, Jack wrote:
> If the checksum and setup are rights,
> did you try to cross the serial to Moxa cable ?
Sorry, I mixed this up a bit with a different ion pump controller the
serial to ethernet card is a LANTRONIX card rather than a Moxa card.
However, this is internal to the device, so I don't have access to the
serial cable.
This is a Digitel MPC pump.
--
Scott Baily
AOT-IC, MS H820
Los Alamos National Laboratory
Los Alamos, NM 87545
ph: (505) 606-2260
- References:
- ethernet-based Gamma ion pump controller (mpc) Scott Baily
- Re: ethernet-based Gamma ion pump controller (mpc) Jack
- Navigate by Date:
- Prev:
Re: ethernet-based Gamma ion pump controller (mpc) Wesley Moore
- Next:
Re: SynApps build error : win32-x86 Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: ethernet-based Gamma ion pump controller (mpc) Pavel Masloff
- Next:
Re: ethernet-based Gamma ion pump controller (mpc) Wesley Moore
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
<2012>
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|