Hi Miroslav,
There are two solutions (databases and medm display files) for this in the synApps std module:
pid_control.* works in most cases.
async_pid_control.* is for feedback with a readback device with asynchronous device support.
Tim
----- Original Message -----
> From: "Miroslav Mihaylov" <[email protected]>
> To: "EPICS tech-talk" <[email protected]>
> Sent: Monday, May 20, 2013 11:56:59 AM
> Subject: EPID soft ioc slow feedback
>
> Hello.
> I am trying to implement the EPID record in my current software ioc.
> I have a Keithley 2000 multimeter and Animatics smart motor.
> I want to move the motor by some small step every time the voltage
> from the
> Keithley reading drifts away from some predefined setpoint.
>
> I have the std module compiled. Also in my ioc src/Makefile I
> included the
>
> iocxxxLinux_DBD += epidRecord.dbd
>
> In my ioc st.cmd file do I need to load some template and/or record?
> Is there any medm gui for the slow feedback.
> The medm screen from xxx.adl->"ADC"->"Slow Feedback" is inactive.
>
> Thanks
> Miroslav
>
>
- Replies:
- Re: EPID soft ioc slow feedback Miroslav Mihaylov
- References:
- EPID soft ioc slow feedback Miroslav Mihaylov
- Navigate by Date:
- Prev:
Re: Error in installing asyn driver Michael Davidsaver
- Next:
Re: EPID soft ioc slow feedback Miroslav Mihaylov
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
EPID soft ioc slow feedback Miroslav Mihaylov
- Next:
Re: EPID soft ioc slow feedback Miroslav Mihaylov
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|