SNC evflags used to be made available to escaped C code via #define
---------------------------------------------------------------------
/* SNC Version 2.0.12: Wed Jun 16 13:13:56 2010: batch_scan_v3.i */
/* Event flags */
#define updateTime 1
#define modeChange 2
#define positioner1Done 3
#define positioner2Done 4
#define positioner3Done 5
---------------------------------------------
Now the 'enums' are defined in-line in sequence code but not in
escaped C functions where they become undefined variables.
# line 2107 "../batch_scan_v3.st"
seq_efSet(ssId, 3/*positioner1Done*/);
Was this done on purpose? What is the best way around this?
Thanks.
Joe
--
Joseph Sullivan
[email protected] <> 630-252-8657
Advanced Photon Source
APS Engineering Services Division
Beamline Controls & Data Acquisition Group
- Replies:
- Re: SNC: evflags not available to escaped C Benjamin Franksen
- Navigate by Date:
- Prev:
Re: archiver tools macro support Tim Mooney
- Next:
National Instruments PCI DAQmx Rafael Vescovi
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: archiver tools macro support Jack
- Next:
Re: SNC: evflags not available to escaped C Benjamin Franksen
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
<2013>
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|