I made a software component specification template that uses UML diagrams.
Such documents aims at specifing Epics Databases, this is not about the modeling of the Epics Base so this is not
exactly what you asked for.
But if your interested I can send it .
Le 10/02/2011 09:07, firstname.lastname@example.org a écrit :
Thank you for sharing some of the behavioural modelling that you have
done for EPICS base. I can see a lot of thought has gone into your
diagrams, which describe some of the low level interactions eloquently.
I am interested in modelling at and above the Record class, to describe
the specialisation of Record into other types, such as ai, mbbi,
waveform, etc. I intend to use the UML model to design and document some
changes to our vacuum control systems, which seem to be increasing in
complexity. Your model would make a well defined package as a basis for
the underlying EPICS activities.
Which modelling tool did you use?
From: Geng, Zheqiao [mailto:email@example.com]
Sent: 09 February 2011 16:25
To: Gillingham, Ian (DLSLtd,RAL,DIA); firstname.lastname@example.org
Subject: RE: UML model of EPICS
I did some simple model for EPICS base. Please see the page 8,9,10 in
the presentation attached.
I made the model only to show some basic structure and behavior of EPICS
base. If you are interested in it, we can discuss further how to model
the EPICS base in detail ...
SLAC National Accelerator Laboratory
2575 Sand Hill Road, Mail Stop 64, Menlo Park, CA 94025-7015, USA
From: email@example.com [firstname.lastname@example.org] On
Behalf Of email@example.com [firstname.lastname@example.org]
Sent: Tuesday, February 08, 2011 12:52 AM
Subject: UML model of EPICS
Does anyone have a UML model of EPICS to hand (partial or otherwise)? At
the moment, I could do with just the package/class diagrams.
It would be particularly useful to get hold of an XMI format file.
This e-mail and any attachments may contain confidential, copyright and
or privileged material, and are for the use of the intended addressee
only. If you are not the intended addressee or an authorised recipient
of the addressee please notify us of receipt by returning the e-mail and
do not use, copy, retain, distribute or disclose the information in or
attached to the e-mail.
Any opinions expressed within this e-mail are those of the individual
and not necessarily of Diamond Light Source Ltd.
Diamond Light Source Ltd. cannot guarantee that this e-mail or any
attachments are free from viruses and we cannot accept liability for any
damage which you may sustain as a result of software viruses which may
be transmitted in or with the message.
Diamond Light Source Limited (company no. 4375679). Registered in
England and Wales with its registered office at Diamond House, Harwell
Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United
tel;work:02 31 45 46 61
- UML model of EPICS ian.gillingham
- RE: UML model of EPICS Geng, Zheqiao
- RE: UML model of EPICS ian.gillingham
- Navigate by Date:
soft ioc runs into fatal exception (base-3.14.12) Carsten Winkler
RE: New widget not available in Boy palette of Control System Studio ZYCHLA Emmanuel
- Navigate by Thread:
RE: UML model of EPICS ian.gillingham
ioc exits with error on EPICS 3.14.12 win32-x86 host Wang Xiaoqiang