Experimental Physics and Industrial Control System

["Ahn, Si Won" <asw@postech.ac.kr>]

I am trying to compile SDDS on Linux (CENTOS 4.8  w/ Kernel 2.6.9-89.0.25)
with EPICS base R3.14.4.  I keep getting the following compile error.   Any
suggestions?
I was not find libXaw.a file our  linux system but I found libXaw.so our
system.

**to start error messages ***

make[1]: Entering directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots'
make -C O.linux-x86_64 -f ../Makefile TOP=../../../../.. T_A=linux-x86_64
install
make[2]: Entering directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots/O.lin
ux-x86_64'
make[2]: *** No rule to make target `/usr/lib64/libXaw.a', needed by
`sddsplot'.  Stop.
make[2]: Leaving directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots/O.lin
ux-x86_64'
make[1]: *** [install.linux-x86_64] Error 2
make[1]: Leaving directory
`/home/post/skumar/Elegant/epics/extensions/src/SDDS/SDDSaps/sddsplots'
make: *** [SDDSaps/sddsplots.install] Error 2

** end ***

>From Ahn, Si Won,
computer system administrator
Physics Dept. POSTECH
San 31 Hyoja-Dong, Namku      Phone: (Korea) 054 279 2760
Pohang, Kyungbuk 790-784      Mobile Phone: 010 3131 2760
Republic of KOREA                E-mail: asw@postech.ac.kr