EPICS Home
g+
g+ Communities
Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing



Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013 
<== Date ==> <== Thread ==>
Subject: RE: GreenSpring TIP810 CANbus system
From: "Allison, Stephanie" <saa@slac.stanford.edu>
To: wtw00992@creighton.edu, tech-talk <tech-talk@aps.anl.gov>
Date: Mon, 19 Jul 2004 10:59:17 -0700 
Hello,

And at SPEAR, we are using the Acromag AVME9670 IP carrier with the TIP810 module to monitor/control our Wiener VME64x crates.  We use Andrew's TIP810 driver code and Andy Foster's XY9660 IP carrier driver (with a small mod to support clearing, enabling, disabling interrupts on receipt of ipac_irq commands).   Both were upgraded to run on RTEMS.

Stephanie Allison
Navigate by Date:
Prev: Re: CA Gateway Kenneth Evans, Jr.
Next: Proglem doing CA calls after catching a signal Robert Soliday
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013 
Navigate by Thread:
Prev: Re: GreenSpring TIP810 CANbus system Matthias Clausen
Next: RTEMSfor MVME5500 Kiman Ha
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICSv4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·