Kinetic Systems 2917/3922 CAMAC interface on PowerPC

[Mark Rivers <RIVERS@cars3.uchicago.edu>]

    Folks,

I am trying to use the CAMAC software which Eric Bjorklund and I wrote for
the Kinetic Systems 2917/3922 interface.  It works fine on the MV167/MV162
CPUs, but I am now trying to use it on the MV2700 (PPC).  I am running Tornado
2.0 (vxWorks 5.4) and EPICS R3.13.3.  The simple CAMAC I/O operations work
fine, but DMA and LAMs (interrupts) are not working.

Before I dive into this I thought I would check to see if anyone else has
already got this combination working?

                                   Thanks,

                                   Mark Rivers