Experiment Hazard Class 8.2 –Sealed Sources
This hazard classification applies to all experiments involving the use of DOE exempt and non-exempt radioactive sealed sources.
Experiments in this Experiment Hazard Class are always categorized as low risk experiments.
Experiment Hazard Control Verification Statements
Engineered Controls – None.
Procedural Controls – Sealed sources must be secured when no experimenter is present.
Design Reviews and Equipment Inspections – Sealed sources must be checked out from the Beamline Sealed Source Custodian and logged into the RMS System. Sources will be exempt or non-exempt as determined by RSO-HP personnel.
GERT (ESH 738) for exempt sealed sources
ANL Radiation Worker I or II (ESH 700 or ESH 702) for non-exempt sealed sources dependign on the associated exposure rate.
Signs and Labeling – All signs and postings required for the experiment station will be supplied by RSO Health Physics.
Personal Protective Equipment –
Dosimetry and Monitoring – All users involved in the experiment will be required to wear a dosimeter during the experiment.
Unless otherwise noted in the approved experiment safety plan, the Director of the APS Engineering Support Division delegates the authority to authorize an experiment in this hazard class to the Beamline Sealed Source Custodian.
Hazard Control Verification
The Director of the APS Engineering Support Division delegates responsibility for verifying that required controls are in place to personnel delegated the authority to perform this task to the Beamline Sealed Source Custodian.
Reviewed May 9, 2013