Floor Coordinator Tasks
This learning module lists, by category,
Floor Coordinator (FC) task responsibility.
Upon completion of this module, the reader
should have a clear overall understanding of the basic operations and facility tasks that are required of a floor coordinator.
Details relative to the operations and facility tasks are the subject matter
of subsequent Lesson Modules. It is important for the reader to know,
at the outset, the contents of the course of study that follows.
Many duties of the Floor
Coordinator are operations-related.
The FC acts as an operations coordinator.
This role encompasses many duties. FCs are to:
Provide shift operations coverage as assigned.
Assist where needed during non-user beam time.
Fill the roll of "On-call" coordinator during
Record events as they occur in the Floor Coordinator Shift
Understand and act on Control Room information
Disseminate log book, EPICS screen, and beam
Understand support systems, such as Personnel Safety System (PSS),
Insertion Device (ID), and water and vacuum systems, well enough to determine faults, trouble-shoot,
and seek the appropriate assistance from systems managers.
Receive, post, monitor, and distribute Experimental Safety Approval Forms (ESAFs).
- Preserve components under Configuration Control or Radiation Safety System (RSS) components, post Configuration Control Work Permits (CCWPs) and Health Physics Type C Survey Info forms.
Communicate effectively the APS policies to
Maintain beamline control during beam-on conditions.
Patti Pedergnana or
Nena Moonier for information or problems relating to this web page.